top of page

Morristown NJ Asphalt Paving Cost

Morristown NJ Asphalt Paving Cost

A paved driveway is a necessity, especially in snowy or rainy weather. Asphalt is the preferred material for driveways due to its relative ease of installation and low cost. It is perfect for handling drainage issues. That's the reason homeowners prefer it when paving their driveways.

However, the price range of asphalt paving differs from place to place, and the same goes for Morristown, NJ. So, if you want to get your pavement done, we got you covered.

This article will give insights into asphalt paving costs and other related subtopics. You will also find the simplest ways to calculate costs before hiring a professional service. Keep reading to learn more in detail.

How Much Does It Cost to Asphalt a Driveway in NJ?

The cost of asphalt driveways in New Jersey is less than $10 ($5- $8) per square foot. The pricing generally depicts the materials cost of driveway paving and depends on the thickness of the paving.

The driveway costs range from $4,400 to $7,700. At Morristown Paving Pros, we provide free estimates for your paving needs and other related services. The cost is determined by factors like asphalt size, quantity, and transportation costs. When you add the labor cost, the price range increases to about $5 -$8 per square foot.

Asphalt paving is more durable and less expensive than concrete. Hence, local homeowners prefer it to other options. But note that it's more costly to remove old surfaces before building a new driveway.

How Do You Calculate the Cost of An Asphalt Driveway?

Our estimation for the price of asphalt is in square feet. The nature of the driveway and the excavation of materials are also determinants. The standard weight of asphalt is 145 lbs./ft3 and the estimation is typically calculated by the ton. To get a close estimate, we measure:

  • The length

  • The width

  • The depth

Next, we multiply values of the length, width, and depth to get the value in cubic feet. We then multiply the value in cubic feet by 145 to know the amount of asphalt needed to complete the project. The price of asphalt ranges from $40-$80 per ton.

At Morristown Paving Pros, we make this process easy.

Are Pavers Cheaper Than Asphalt?

When it comes to outright costs, asphalt is cheaper than pavers. However, in the long run, pavers are low maintenance compared to asphalt. Pavers have to be laid by hand, making it labor intensive. On the other hand, asphalt is laid by machines.

With time asphalt wears off and must be maintained within 1-2 years of driveway paving. General maintenance includes crack repair and seal coating every 2-3 years.

Pavers are made of long-lasting materials and formed with separate units. Therefore, pavers do not require periodic maintenance. Faulty pavers are easier to replace.

Cost is a critical determinant when choosing the type of driveway paving. Proper estimates are vital before embarking on the project.

Most local homeowners might choose asphalt due to affordability and ease of installation. But other factors can affect the pricing. The total cost will have to consider labor, terrain/site conditions, square feet, and the asphalt index. Our team of experienced professionals are the best paving contractors in Morristown NJ.

How Much Does It Cost to Pave Asphalt in Morristown?

Morristown has its range of pricing for installing an asphalt driveway. Your budget will need to cover the cost of materials per square foot, labor, and other project costs associated with your specific installation.

There has been a boom in recent requests for asphalt paving in Morristown. The high demand might put other companies behind but our team at Morristown Paving Pros is here to help you with your project!

How Much Does It Cost to Pave a Driveway?

The main issue when paving a driveway is cost and durability. Different materials can get the job done. These materials include concrete, asphalt, tar, pavers, and many more. Asphalt, also known as blacktop, is the most affordable surfacing material that provides a wide range of advantages despite its lower cost.

  • The average price range of asphalt material varies between $3-$4 per square foot, not including labor or other variables.

To install asphaltic concrete driveways, we consider drainage to prevent water infiltration. Due to the regular cold and snowy climate in New Jersey, residents of Morristown are investing more in asphalt driveways.

Most local homeowners chose asphalt because of its low cost. The strength of materials is also a key decision criterion and installation time.

Factors in Calculating Asphalt Driveway Cost

Different factors come into play when calculating the cost of an asphalt driveway. These are some of the determinants:

1. Location

The cost of living in a given area can also affect the pricing.

2. Positioning of the driveway

The installation cost will be higher if the driveway is located further on the property or in a difficult-to-reach area.

3. Area in square feet

The larger the area in square feet, the higher the cost. Asphalt is sold in tons. A ton can cover up to 40 to 80 square feet, depending on the thickness desired for the layers of asphalt.

4. Labor Costs

The cost of labor also varies with the scope of the project and can be affected by the location, and size of the project, including the labor intensity of the site's conditions.

5. Type of asphalt used

Hot mix asphalt is the most commonly used. It costs between $100 - $200 a ton. However, cold mix asphalt is much more affordable but is used mainly for repairs.

There are different types of Asphalt we use in paving jobs. These include:


This is a premium non-recycled asphalt and is the gold standard in the industry.

Recycled asphalt

It is a recyclable product making it environmentally friendly. The recycled product is cheaper than new asphalt. It is an excellent option for asphalt driveways, too.

Colored asphalt

Asphalt usually has a black color tone. However, it is colored using pigments while it is still hot. It is used for safety and decorative applications.

Asphalt Paving vs. Concrete: Which is the Better Option for My Driveway?

Appearance and Appeal

Asphalt is primarily black and in some cases where you may not want the stark contrast of black asphalt against your property, and or landscaping then you may want to choose a different material.


Asphalt is cheaper than concrete and is ideal for a low-cost paving budget. Concrete is more cost-intensive due to material costs and labor. Using concrete for a new driveway will be significantly more expensive. Therefore, asphalt is preferable in most situations.

Lifespan and Maintenance

A concrete driveway is more durable than asphalt. However, it is cheaper to maintain asphalt than concrete due to material and repair costs. Here in the northeast where we deal with harsh winters, asphalt is a superior choice.

Where Can I Find Good Asphalt Paving Companies in Morristown, New Jersey?

Morristown paving Pros is the answer when it comes to your paving needs. We offer professional and affordable services. Also, we offer residential and commercial services for Morristown NJ, and surrounding areas.

We are a trusted company in Morristown, NJ, and an expert at blacktop and asphalt paving. We can also handle asphalt paving for walkways and other applications where possible. Our state-of-the-art equipment is ideal for all paving jobs in Morristown.


The cost of paving in Morris County, NJ, is relative to the size of the task. Note that a new driveway can do wonders for your property's value and provide a safe, enjoyable surface for years to come. You can repair or create a new driveway in Morriston, NJ, as your budget permits. Overall, these costs are just estimates, but please give us a call for a free estimate.

Related Posts

See All

Morristown NJ Asphalt Repair

Morristown NJ Asphalt Repair Asphalt can be applied in several locations such as driveway paving, walkway, parking lots, country roads, trails, etc. Its cost-effectiveness and high longevity make it a

Morristown NJ Asphalt Paving Process

Morristown NJ Asphalt Paving Process Asphalt is arguably one of the best materials for building strong pavements. This is due to its tendency to last longer and quick installation process. Moreover, a


bottom of page